Mold dehumidifiers DAE


  2. equipment
  3. air treatment systems

Mold dehumidifiers DAE

The mold dehumidifiers DAE represent the more innovative solution for removing the condensate on the moulds during the injection and blowing molding processes.

The air is dried by means of a rotor resulting in a dew point up to -10°C. Airflow rates from 800 to 3000 m3/h. They can be applied to one or more processing machines.

TECHNICAL SPECIFICATIONS: 

  • Control with microprocessor which manages the operation of the machine and offers a constant dew point with PID control of the regeneration. 
  • Filtration through a “panel“ filter, easily accessible and cleanable. 
  • The precooler of the air with heat exchanger that uses low-temperature water 7-10°C.
  • The condensed water is discharged from a pump with built-in float. 
  • The high-efficiency fan sends air to the high-efficiency absorbent rotor which ensures a stable process even in tropical climatic conditions with temperatures up to 45°C and moisture up to 90%. 
  • To reduce the temperature of the air on the outlet pipe, you can install an aftercooler. 
  • R S485 Modbus interface.