Indirect Cooling Water Temperature Controller 95°C TCA 1 and TCA 1 Plus


  2. equipment
  3. temperature controllers

Indirect Cooling Water Temperature Controller 95°C Series HYDROWER Model TCA 1 and TCA 1 Plus

The indirect cooling thermoregulator grants an accurate temperature control of the processing fluid with following main peculiarities:

  • Easy to install and to operate
  • Simple operator interface
  • Pump working with positive or negative pressure as leak stopper or mold draining
  • Compact unit

Main Specifications of Temperature Controller TCA 1 and TCA 1 Plus

  • Stainless steel water tank
  • Materials in contact with processing fluid made of non-ferrous components
  • Reversable submerged pump
  • Brazed stainless steel cooling heat exchanger
  • Possibility to drain mold
  • Fast cooling mode operation at the end of the process
  • Filter at the inlet of the chilled fluid
  • Filter at the inlet from user
  • Sturdy painted frame RAL 9006

Technical Descriptions:

  • Processing temperature: max 95°C
  • Heating capacity (in alternative): 3 kW or 6 kW or 9 kW
  • Cooling capacity: 45 kW
  • Max water flow: 40 l/min
  • Max pressure: 3,8 bar
  • Dimensions in mm: 620x234x(h)480
  • Stainless steel tank
  • Brazed stainless steel cooling heat exchanger
  • Cooling capacity 45 kW (with processing fluid at 80°C and cooling fluid at +15°C)
  • Incoloy electrical heater
  • Submerged pump
  • Pump motor power: 0,65 kW
  • Automatic filling valve with magnetic level control
  • Reversable pump to operate with positive or negative pressure to prevent eventual mold leakages
  • Filter at the cooling fluid inlet
  • Filter at the unit inlet from user/mold
  • Possibility to drain mold using reversable pump
  • Fast cooling mode at the end of the use
  • Microprocessor control with LCD display of the set temperature and of the real processing temperature value
  • Automatic PID thermoregulation for both heating and cooling
  • Alarm output to remote eventual alarm signal
  • Three-phase unit 400V/3 phases/50 Hz + N
  • Moveble wheels equipped with breaks
  • Electrical power control panel IP54
  • User/Mold connections G1/2”
  • Connections for cooling fluid G3/8”
  • Weight approx 30 kg
  • Dimensions in mm: 620x234x(h)480

Options for TCA 1

  • Serial outlet RS485
  • Solid state relay for electrical heater

Version TCA 1 Plus

  • Colour touch screen display 4,3”
  • Historical processing temperature trend diagram
  • Historical alarms
  • Possibility to set an alarm when processing temperature is higher than a max set value or lower than a min set value
  • Filling time control, AQUA STOP control
  • Serial outlet RS485 included

Options for Version TCA 1 Plus

  • Solid state relay for electrical heater
  • Serial outlet type TCP-IP Modbus
  • Interface OPC UA Ethernet (EUROMAP 82.1) connector RJ-45 (female)
  • Connection port VNC (possibility to connect injection molding machine screen or external PC) with interface TCP-IP E
  • Possibility to connect temperature controller to the injection molding machine control (on request with TCA 1 Plus Version)